User's Manual

---------------------------------------------------------------21/36-------------------------------------------------------------
5.7 Set Code Format
This menu option sets the format of representation of ISO-code. The ARE H9 currently supports
three code formats.
ISO Animal code format for ISO-FDX and ISO-HDX
ISO Industry code format for ISO-FDX and ISO-HDX
ISO BDE code format for ISO-FDX for waste management
ISO Attributs for ISO-FDX and ISO-HDX with attribute display
(Like the former H5 display)
Hexadecimal for Trovan, PSK1, ASK 64bit, ISO-FDX and ISO-HDX
Set Code Format
ISO Animal
The selection sets the way in which the transponder code is displayed.
This option has no influence to the reading function; it only filters how the read ID-code is
displayed. This setting has only impact to ISO-FDX and ISO HDX transponders.
For example, if code format is set to “ISO-Animal” and an ISO transponder without animal bit
is read the ARE H9 will signal this with 3 beeps and the following display:
No ISO Animal
ISO-Fdx
The ARE H9 selects automatically the hexadecimal display if a Trovan, PSK1 or Ask64Bit
transponder is read.
This setting is stored in the device and is still valid after power off/on operation.