User manual

4. After loosening the two screws of the battery protection plate,

remove the plate from the front. When doing so, guide the

battery connector through the intended opening.

5. Now remove the entire battery kit by carefully and slowly

pulling it out from the front. Be aware of the weight involved,

especially with the more powerful models.

Note:

Before inserting the new battery drawer, you

must check the battery system for compatibility

once

again (see also Page 13).

6. Now insert the new spare kit in reverse order and finally screw

the removed battery protection plate back on.

7. Then reconnect the internal battery system by connecting the

two battery connectors to one another.

When making the connection, make sure that you

attach the plugs quickly and securely into one

another. Any minor electric arcing that may occur

when doing so is insignificant.

8. Then slowly close the front panel in the reverse order using

appropriate caution. Make sure that you don't pinch any

cables; always handle the front panel with both hands

(applying even force on the left and right).