User manual

Fig. 1: Pre-installation of the left and right rails

2. Now locate the corresponding installation positions in the

rack and place two cage nuts at each post corresponding to

the position of the rails. Use 8 cage nuts for each rail pair.

Fig. 2 : Fastening the rails in the rack

3. Now insert the rails. According to the illustration above,

fasten the rails to the rear post with two screws each; in the

front, first use the lower screw. Now tighten all the screws,

including the 3 screws each on the rail itself.

4. Repeat these steps for each individual tray.

Front of rack

Rear of rack

Left rail

Right rail