User manual

6 Electrical Connection

6.1 Contacting the battery modules

To make wiring easier, first remove the front panel(s)

of the external battery units.

Unscrew the two centered screws in front panel (1) using a

suitable cross-slot screwdriver (recommended: Phillips PH1).

Now reach behind the front panel on the right and the left and

slide it a few millimeters to the left (2). The lock will be released

you can take off the entire front panel towards the front (3).

Fig. 12 : Removing the front panel of the battery extension;

removing the top and bottom access slot covers

Each front panel has a top and bottom slot cover. Now remove

the top slot cover in a front panel. If you are using more than one

battery unit, remove both slot covers in all the other front panels

so that you can wire that battery units all the way through.

Top slot cove

Bottom

slot cover