Power Supply User Manual

20
Handle the components with care. Please take
into account the weight. It may be necessary to
engage the help of a second person, particularly
in the case of the 2 and 3 kVA models and if
there are external battery units.
4.2 Point of Installation
PROTECT C. is designed to be installed in a protected
environment. When installing the unit, pay attention to such
factors as sufficient ventilation and suitable ambient
conditions.
PROTECT C. is air-cooled. Do not obstruct the
air vents!
The UPS and in particular its external battery
modules should preferably be operated at room
temperature (between 15°C and 25°C).
Install the units in a room that is dry, relatively dust-free and
free of chemical vapours.
Make sure that no magnetic storage media are stored and/or
operated close to PROTECT C.
Check the nameplate to make sure the voltage
and frequency data correspond to the values
applicable to your loads.