Power Supply User Manual

Do not connect any household appliances or power tools to the

UPS.

Never connect or switch on additional load

segments during a power outage, i.e. when the

UPS is operating in emergency power mode!

As a rule, if there has never been an overload in normal

operation, there won’t be an overload in battery mode.

If the malfunction LED lights up and you hear a

warning sound, there is a malfunction which

causes the system to shut down. Follow the

instructions provided in Chapter 9.1.

Then make sure that the wire jumper in the emergency shutdown

plug is firmly in place and tighten the two outside screws on the

plug (also see pg. 31, no.

7).

If you want to use the emergency power off function, continue

first with Chapter 8.4 on pg. 57.

The integrated emergency power off only serves to

shut off the UPS voltage. This happens

electronically and is not

the same as an

EMERGENCY STOP system according to DIN EN

ISO 13850.