Power Supply User Manual

7.3 Display (Main Menu)

Press “ESC” to access the main menu.

Main menu for the LCD display

The following figures show the display in English (to change the

language see Chapter 7.3.6 on pg. 49ff. “Settings”).

7.3.1 UPS status - display

You can access the status screen by pressing “▲” or “▼” in the

main menu to go to “UPS Status” (the line is then highlighted)

and then press “ENTER” (automatic display after 5 min.).

The UPS status display is divided into several different sections

to retrieve the following information:

• Display that summarizes all load segment-relevant input and

output parameters, including the information on operation

status, the current load and the currently available battery

capacity

• Messages and alarms (also see Chapter 9.1.1 on pg. 59ff.)

• Battery display with status window and state of charge

Part 1 of the UPS status display

The display indicates the current UPS status in the top middle

section. Here is a list of the symbols used and what they mean:

Input Output

18min

Event log

UPS Status

Measurements

Control

Identification

UPS status

UPS load

Autonomy time

Battery capacity

Settings