Instructions

English 21
Technical data
Model LT60
Item number 10091
Input 230 V AC, 50 Hz
Input current 15 A
Output 12 V / 24 V DC
Charging voltage (max.)
12 V: 14.7 V
24 V: 29.4 V
Charging current +/-10 % 12 V
5 A / 20 A / 60 A
RMS
24 V 2 A / 10 A / 20 A
RMS
Power supply 13.6 V
30 A
Jump start function 12 V
540 A max.
180 A (5 seconds)
Recommended battery
capacity (24h comfort)
240 Ah
Recommended battery
capacity for maintenance
880 Ah
Ambient
temperature
-20
º
C till +40
º
C
Type of batteries
lead-acid batteries
(WET, MF, AGM and GEL)
For batteries with a capa-
city (recommended)
10 Ah - 600 Ah
Housing protection IP 20
Weight 18.5 kg
Normal use
The charger is intended for charging open and
a variety of closed, maintenance-free lead-acid
rechargeable batteries (batteries) as found in cars,
boats, lorries and other vehicles, e.g.:
•
wet batteries (WET)
•
Lead-acid batteries (liquid electrolyte)
•
Gel batteries (gel-type electrolyte)
•
AGM batteries (electrolyte inside absorbed glass
matt)
The charging device can be directly connected to
the batteries using the clamps.
The charger further has a Power Supply function
for replacing the battery or working on the vehicle’s
electronics.
The charging devices is not intended for charging
battery types not listed above.
This device is not intended for use by children or
persons with limited mental capacity or lacking
experience and/or lacking expertise. Children should
be supervised to ensure they do not play with the
device.
Any other use or modication of the device is con-
sidered improper and involves signicant risks. The
manufacturer assumes no liability for damages due
to improper use.
Contents
Please check the contents immediately after ope-
ning the package. Check the device
and all parts for damage. Do not operate a defective
device or parts.
•
LT60 Charger incl. clamp terminal connection
cable
•
Temperature sensor connection cable
•
6 screws 3x 15 mm
•
Handle
•
Instructions for use
Please include all relevant documentation to other
users!