Instructions

English
31
TROUBLESHOOTING
Error/Problem Possible cause Correction
The
LED (22) will light
up.
Defective battery:
Battery voltage is under 1.5 V
Have the battery checked by a speciality
repair shop.
Replace battery.
LED
(21) will light up.
Battery incorrectly/not connected Unplug charger and check the connections.
Battery cannot be charged No power supply, charger not plugged in. Verify the charger is plugged into a 230 V
mains outlet and the “Power” LED is on.
Battery may be defective
Long charging time Only a very low charging current is used
in very low temperatures (below 0 ºC).
This will extend the charging time. As the
battery warms up, the charging current is
adjusted accordingly.
Charge battery in normal conditions.
Explosion hazard!
Never charge frozen batteries.
Battery capacity too high for the charger
being used.
Use a suitable charger.
Battery voltage too low Battery wasn’t charged long enough. Ensure the battery is charged long enough.
CLEANING, CARE
AND MAINTENANCE
Caution!
Caution! Risk of electric shock. Always rst unplug the
230 V power plug (5).
•
Clean clamps after every charging. To prevent corro-
sion, wipe o any battery uid which may have come
into contact with the clamps.
•
Carefully wind the cable when storing the device. This
will help prevent accidental damage to the cable and
the device.
•
Clean the product with a soft, dry cloth.
•
Store the machine in a clean, dry place.
Caution!
Only qualied technical personnel should change the
plug or the connecting cables. This will guarantee the
safety of the device is maintained. If the product is no
longer suitable for use dispose of it in an environmen-
tally friendly manner in accordance with your local
ordinances.