User manual

The ceramic hob
12
TO USE THE SCRAPER , FOLLOW THESE INSTRUCTIONS :
1 Expose the razor blade by pushing the button (on the
top of the scraper) forwards to “stop” (see illustration).
You can check the razor blade is locked into position by
pushing the blade down onto a hard surface.
2 Make sure the razor blade is clean and not worn other-
wise it might damage the hob. New razor blades can be
bought from drugstores.
3 Angle the scraper at approx. 45° and scrap away the
spillage. The razor blade can be pressed down hard
onto the hob without causing any damage.
4 Use kitchen roll paper to wipe clean the blade carefully.
5 When you have finished, press down the button and
push it backwards as far as it will go. Keep the scraper
out of the reach of children.