User manual
Table Of Contents
- CONTENTS
- 1. SAFETY INFORMATION
- 2. SAFETY INSTRUCTIONS
- 3. PRODUCT DESCRIPTION
- 4. BEFORE FIRST USE
- 5. HOB - DAILY USE
- 6. HOB - HINTS AND TIPS
- 7. HOB - CARE AND CLEANING
- 8. OVEN - DAILY USE
- 9. OVEN - CLOCK FUNCTIONS
- 10. OVEN - USING THE ACCESSORIES
- 11. OVEN - HINTS AND TIPS
- 12. OVEN - CARE AND CLEANING
- 13. TROUBLESHOOTING
- 14. INSTALLATION
- 14.1 Location of the appliance
- 14.2 Technical data
- 14.3 Other technical data
- 14.4 Bypass diameters
- 14.5 Gas burners for NATURAL GAS G20 2.0 kPa
- 14.6 Gas burners for LPG G30 2.8-3.0 kPa
- 14.7 Gas connection
- 14.8 Flexible nonmetal pipes connection
- 14.9 Adjustment to different types of gas
- 14.10 Hob injectors replacement
- 14.11 Adjusting the minimum gas level on the hob burner
- 14.12 Oven injector replacement
- 14.13 Adjusting the minimum gas level on the oven burner
- 14.14 Gas grill injector replacement
- 14.15 Levelling
- 14.16 Backguard
- 14.17 Electrical installation
6.2 Diameters of cookware
WARNING!
Use cookware with
diameters applicable to the
size of burners.
Burner Diameter of cook-
ware (mm)
Triple Crown 160 - 260
Rapid 160 - 240
Burner Diameter of cook-
ware (mm)
Semi-rapid 140 - 240
Auxiliary 120 - 180
6.3 Energy saving
• If it is possible, always put the lids on
the cookware.
• When the liquid starts to boil, turn
down the flame to barely simmer the
liquid.
7. HOB - CARE AND CLEANING
WARNING!
Refer to Safety chapters.
7.1 General information
• Clean the hob after each use.
• Always use cookware with clean
bottom.
• Scratches or dark stains on the surface
have no effect on how the hob
operates.
• Use a special cleaner applicable for
the surface of the hob.
• Wash stainless steel parts with water,
and then dry them with a soft cloth.
7.2 Cleaning the hob
• Remove immediately: melted plastic,
plastic foil, sugar and food with sugar.
If not, the dirt can cause damage to
the hob. Take care to avoid burns.
• Remove when the hob is sufficiently
cool: limescale rings, water rings, fat
stains, shiny metallic discoloration.
Clean the hob with a moist cloth and
non-abrasive detergent. After
cleaning, wipe the hob dry with a soft
cloth.
• To clean the enamelled parts, cap
and crown, wash them with warm
soapy water and dry them carefully
before you put them back on.
7.3 Cleaning the spark plug
This feature is obtained through a
ceramic ignition candle with a metal
electrode. Keep these components well
clean to prevent difficult lighting and
check that the burner crown holes are
not obstructed.
7.4 Pan supports
The pan supports are not
resistant to washing in a
dishwasher. They must be
washed by hand.
1. Remove the pan supports to easily
clean the hob.
Be very careful when you
replace the pan supports
to prevent the hob top
from damage.
2. After you clean the pan supports,
make sure that they are in correct
positions.
3. For the burner to operate correctly,
make sure that the arms of the pan
supports are aligned with the centre
of the burner.
7.5 Periodic maintenance
Speak to your local Authorised Service
Centre periodically to check the
conditions of the gas supply pipe and
the pressure adjuster, if fitted.
www.aeg.com
12