User manual
Table Of Contents
- CONTENTS
- 1. SAFETY INFORMATION
- 2. SAFETY INSTRUCTIONS
- 3. PRODUCT DESCRIPTION
- 4. BEFORE FIRST USE
- 5. HOB - DAILY USE
- 6. HOB - HINTS AND TIPS
- 7. HOB - CARE AND CLEANING
- 8. OVEN - DAILY USE
- 9. OVEN - CLOCK FUNCTIONS
- 10. OVEN - USING THE ACCESSORIES
- 11. OVEN - HINTS AND TIPS
- 12. OVEN - CARE AND CLEANING
- 13. TROUBLESHOOTING
- 14. INSTALLATION
- 14.1 Location of the appliance
- 14.2 Technical data
- 14.3 Other technical data
- 14.4 Bypass diameters
- 14.5 Gas burners for NATURAL GAS G20 2.0 kPa
- 14.6 Gas burners for LPG G30 2.8-3.0 kPa
- 14.7 Gas connection
- 14.8 Flexible nonmetal pipes connection
- 14.9 Adjustment to different types of gas
- 14.10 Hob injectors replacement
- 14.11 Adjusting the minimum gas level on the hob burner
- 14.12 Oven injector replacement
- 14.13 Adjusting the minimum gas level on the oven burner
- 14.14 Gas grill injector replacement
- 14.15 Levelling
- 14.16 Backguard
- 14.17 Electrical installation
![](/manual/aeg/10369gn-mn/user-manual-english/images/img-21.png)
3. Close the oven door to the first
opening position (halfway). Then pull
forward and remove the door from its
seat.
4. Put the door on a soft cloth on a
stable surface.
5. Use a screwdriver to remove 2 screws
from bottom edge of door.
1
1
6. Use a spatula made of wood or
plastic or equivalent to open the
inner door. Hold the outer door, and
push the inner door against the top
edge of the door. Lift the inner door.
2
2
3
7. Clean the oven door with water and
soap. Clean inner side of the door.
Dry the oven door carefully.
When the cleaning is completed, install
the glass panels and the oven door. To
install the oven door, do the above steps
in the opposite sequence.
4
4
5
5
6
12.6 Replacing the lamp
Put a cloth on the bottom of the interior
of the appliance. It prevents damage to
the lamp glass cover and the cavity.
WARNING!
Danger of electrocution!
Disconnect the fuse before
you replace the lamp.
The lamp and the lamp glass
cover can be hot.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box
or deactivate the circuit breaker.
www.aeg.com
22