User manual
Table Of Contents
- CONTENTS
- 1. SAFETY INFORMATION
- 2. SAFETY INSTRUCTIONS
- 3. PRODUCT DESCRIPTION
- 4. BEFORE FIRST USE
- 5. HOB - DAILY USE
- 6. HOB - HINTS AND TIPS
- 7. HOB - CARE AND CLEANING
- 8. OVEN - DAILY USE
- 9. OVEN - CLOCK FUNCTIONS
- 10. OVEN - USING THE ACCESSORIES
- 11. OVEN - HINTS AND TIPS
- 12. OVEN - CARE AND CLEANING
- 13. TROUBLESHOOTING
- 14. INSTALLATION
- 14.1 Location of the appliance
- 14.2 Technical data
- 14.3 Other technical data
- 14.4 Bypass diameters
- 14.5 Gas burners for NATURAL GAS G20 2.0 kPa
- 14.6 Gas burners for LPG G30 2.8-3.0 kPa
- 14.7 Gas connection
- 14.8 Flexible nonmetal pipes connection
- 14.9 Adjustment to different types of gas
- 14.10 Hob injectors replacement
- 14.11 Adjusting the minimum gas level on the hob burner
- 14.12 Oven injector replacement
- 14.13 Adjusting the minimum gas level on the oven burner
- 14.14 Gas grill injector replacement
- 14.15 Levelling
- 14.16 Backguard
- 14.17 Electrical installation
![](/manual/aeg/10369gn-mn/user-manual-english/images/img-27.png)
Changing from natural gas to
liquid gas
1. Fully tighten the bypass screw.
2. Put the knob back.
Changing from liquid gas to
natural gas
1. Unscrew approximately one turn the
bypass screw position A.
2. Put the knob for the hob back.
3. Connect the appliance to the
electricity.
WARNING!
Put the mains plug into
the mains socket only if
all parts are back into
their initial position.
There is a risk of injury.
4.
Light the burner.
Refer to "Hob - Daily use" chapter.
5. Turn the knob for the hob to the
minimum position.
6. Remove the knob for the hob again.
7. Screw on slowly the bypass screw till
the flame becomes minimum and
stable.
8. Put the knob for the hob back on.
14.12 Oven injector
replacement
1. Remove the bottom plate of the
oven cavity to get access to the oven
burner .
2. Carefully remove from the burner the
thermocouple A. Next remove the
spark plug B.
A
B
3.
Unscrew the screw and slowly pull
out the burner.
1
2
4. Release the burner injector with a 7
mm socket spanner and replace it
with a right one.
Assemble the burner in a revers
sequence.
Replace the gas type sticker near the gas
supply ramp with the one related to the
new gas type.
14.13 Adjusting the minimum
gas level on the oven burner
1. Disconnect the appliance from the
electricity.
www.aeg.com
28