User manual

Problems and actions needed
22
Problems and actions needed
Never attempt any repairs or work on the cooker which could cause injury or damage the product. If you cannot
solve the problem after checking the list below, contact a service company approved by the supplier.
At the end of the cooker’s life
1 Disconnect the cooker from the electrical supply.
2 Cut off the electrical lead, as close as possible to
the rear of the cooker.
3 Make sure that the oven door safety catch has been
deactivated, to remove the risk of children locking
themselves inside the oven.
Contact your local council to find out where you can
dispose of your cooker.
Problem Action needed
The cooker has no electrical supply
Check that:
•
THE FUSE(S) has not gone
•
THE PLUG is pushed in correctly
•
THE RCD (if fitted) has not tripped
The rear left hotplate is not working
(230-volt cooker only).
The cooker has an electrical inter-lock so that the rear left
hotplate cannot heat while the oven Swift Start function is on.
This hotplate can be used as soon as the oven Swift Start heat-
ing is finished.
Boiling/frying takes a long time.
Check you have a suitable pan that conducts heat properly (see
page 10)
The oven light is not working
Replace broken bulb (see page 16)
The door safety catch isn’t working
Activate the door safety catch (see page 6)