Instructions
www.aeg-automotive.com
26
Connecting the device
Warning!
clamps touching.
1. Connect the required
terminal connection
cable (with rings or
clamps) to the device’s
comfort plug connec-
tion (3).
2. Attach the red (+)
terminal.
3. Attach the black (-)
terminal.
Note:
The black (-) clamp can also be connected to the
vehicle chassis (Please refer to the auto maker‘s in-
structions!). Be sure both clamps have good contact
Warning!
the charger to the 230 V power socket without
extension cable. In exceptions, use the shortest
possible undamaged and unrolled 230 V extension
cable.
4. Plug the charger plug into a 230V power socket.
reset to the default settings.
-
nected with the poles reversed, the error indicator
(Er 1) will light up. In this case, unplug the charger
(also see “Troubleshooting”).
Note:
shop.
6 A
Mode
Start charging
1.
the desired charging mode 6 V, 12 V or 24 V.
2.
Note:
If an incorrect charging mode was selected, the
error code (Er 1) will appear. In this case unplug the
Note:
During the charging process the blocks inside the
status.
switch to trickle charge to maintain the charging
Display light
Press the “Mode” button (2).
approx. 30 seconds whilst charging. Press the Mode
30 seconds.
Complete charging and disconnect charger
1.
230V alternating current socket.
2. Disconnect the black (-) clamp from the (-)
3. Disconnect the red (+) clamp from the (+)