User manual

GI--KWIK--ENG
17
Modicon Micro Quick-Start
17
Step 8. Installing Modsoft Lite
Modsoft Lite programming software for the Micro can be installed
on any XT/AT IBM Compatible computer. In order to program the
Micro with Modsoft Lite, you will need the following equipment:
1. An XT/AT IBM compatible computer.
2. Modsoft Lite Software (Part #371SPU92100).
3. One of the following programming cables:
110XCA28201 1 m (3 ft) programming cable
110XCA28202 2 m (6 ft) programming cable
110XCA28203 4 m (12 ft) programming cable
4. One of the following computer adapters:
110XCA20300 9--pin, DB-type
110XCA20400 25--pin, DB-type
5. A Modicon Micro, correctly wired and connected to power.
6. A Micro Ladder Logic Manual (GM--MICR--LDR) and a
Modsoft Lite Programmer User Manual (GM--MSLT--001).
Installation of Modsoft Lite also assumes that you have basic
computer skills, and are familiar with DOS terminology and with
your computer’s operation.
Caution Before proceeding, you should be familiar
with how your computer operates. If you are unsure
about any aspect of the computer, suspend installation
and refer to the operating manuals that came with your
computer.