User manual

Modicon Micro Quick-Start

GI--KWIK--ENG

Installing Modsoft Lite (refer t o Page 13 in the Modsoft Lite

Programmer User Manual)

Step 1 Modsoft Lite comes with both 3 1/2” and 5 1/4”

floppy diskettes. After reading the software

licensing agreement, open the diskette package

and locate Disk 1 of the size diskette that your

computer uses. Insert this diskette into drive A

(or B, if desired) and close the drive door.

Step 2 Change to Drive A (or B) by typing at the DOS

prompt: A: [then press ENTER].

Step 3 At the DOS prompt, type: LINSTALL [then press

ENTER].

Step 4 Modsoft Lite now displays the Install screen. This

screen gives you options such as where you want to

install the software, etc. Simply read and follow the

screen instructions to completely install Modsoft Lite

on your hard drive. Modsoft Lite will prompt you

when you have successfully installed the software.

Step 5 If you have just completed the Modsoft Lite

installation, you will be in the LMODSOFT directory

of your hard drive. If you have previously installed

Modsoft Lite, you must change to the Modsoft Lite

Directory. To do this, at the DOS prompt, type: CD\

[then press ENTER]; then type: CD\LMODSOFT

[then press ENTER]. Your DOS prompt will look

something like: LMODSOFT>

Step 6 Start Modsoft Lite by typing, at the DOS prompt:

LMODSOFT [then press ENTER].