User manual

CAUTION!
In the absence of electricity
you can ignite the oven
burner without an electrical
device. In this case open the
oven door, put the flame
near the hole in the bottom
of the oven cavity, turn the
knob to the spark position
and push it down. Keep the
knob for the oven functions
pushed for equal or less than
15 seconds to let the
thermocouple warm up.
If the oven burner
accidentally goes out, turn
the knob for the oven
functions to the off position
and try to light the burner
again after minimum 1
minute.
Check if the burner holes are
not blocked.
8.3 Turning off the oven
burners
To put out the flame, turn the knob to
the off position.
8.4 Top Oven Functions
Oven function Application
Off position The appliance is off.
1 - 8 Heat settings Heat settings for Conventional Cooking.
Grilling To grill flat food in the middle of the grill and to
toast.
8.5 Main Oven Functions
Oven function Application
Off position The appliance is off.
Minimum temperature To set the minimum temperature.
1 - 9 Heat settings Heat settings for Conventional Cooking.
Ignition To activate the main oven.
8.6 Inserting the oven
accessories
Put the slide-in accessories between the
guide bars in the top / main oven on the
necessary shelf position.
ENGLISH 13