User manual

ENGLISH 21
Maintenance
0RIORªTOªANYªMAINTENANCEªWORKªORª
changing parts, disconnect the
appliance from the gas and electricity
power sources.
Replacing the taps and
thermostat
Proceed in the following way when
replacing a tap or the thermostat:
r© 2EMOVE©PAN©SUPPORTS©BURNER©HEADS
r© 5NSCREW©THE©BURNER©kXING©SCREWS©
1
(fig. 26).(four for ultrarapid burner and
two for the other burners)
r© 2EMOVE©THE©HOB©UNSCREWING©FRONTAL©
and rear fixing screws (
4 , 3 , 2 )
(fig. 26) which lock the hob .
r©
0ULL©OUT©THE©KNOBS©
r© 5NSCREW©THE©NUTS©
2
of the gas
aluminium pipes and pull out the
thermocouple quick connectors
3
(fig. 28).
r©
5NSCREW©THE©SCREWS©
2 (fig. 27) which
lock the crosspieces.
r© 5NSCREW©THE©SCREWS©
1 (fig. 27) which
unite the the bridles of the taps to the
front frame.
r© -AKE©TO©SLIP©THE©RAMP©TOWARD©THE©BACK©
part and unscrew the screws
1
(fig. 28) in or
der to free the taps.
r© #HANGE©SEAL©EACH©TIME©A©TAP©OR©A©
thermostat is replaced. This will ensure
perfect retention between the tap or a
thermostat and part.
r© 2EASSEMBLE©ALL©THE©PARTS©FOLLOWING©THE©
same procedure but in the reverse
order.
2
1
2
2
Fig. 27
1
2
3
Fig. 28
Electrical connection
The electrical connection must be
carried out in accor
dance with the
current standards and laws in force.
Before connecting check that:
1
2
3
4
Fig. 26