User manual

36
R
R
R
R
M
M
L
P
● Remove the telescopic chimney support
MM
MM
M by unscrewing
the side screws
RR
RR
R (one on each side - these screws must be
kept).
Fig. 6Fig. 6
Fig. 6Fig. 6
Fig. 6.
● Remove the air pipe
LL
LL
L from the telescopic chimney
support
MM
MM
M; to do this, unscrew the four screws (Ø 2,9 x
9,5 mm) fixing the air pipe to the support (these screws
must be kept).
Fig. 6Fig. 6
Fig. 6Fig. 6
Fig. 6.
● Fit the telescopic chimney support to the wall, at a point
close to the ceiling. The telescopic chimney support has a
reference mark
PP
PP
P, which must coincide with the line that
you have already drawn on the wall.
Fig. 6Fig. 6
Fig. 6Fig. 6
Fig. 6.
● Using a pencil, mark the two holes required to fix the
support, and drill the holes (Ø 8 mm).
Fig. 6 Fig. 6
Fig. 6 Fig. 6
Fig. 6.
● Insert two plugs and fix the telescopic chimney support
MM
MM
M
using 2 screws size (5x45 mm).
Fig. 6Fig. 6
Fig. 6Fig. 6
Fig. 6.
● During installation the plug must not be connected to the
power supply.
Fig. 6Fig. 6
Fig. 6Fig. 6
Fig. 6