User manual

Hood OperationHood Operation

Hood Operation

● The control panel is located on the front of the hood.

● The control panel numbers and symbols (

Fig. 8Fig. 8

Fig. 8 from left

to right) are explained in the key below:

= Lighting, on/off.

= Fan switch (speeds 1-9).

= Fan timer, 15 minutes.

= Display showing fan speed (1-9), high speed (P),

change grease filters (F) and change activated

carbon filters (C).

= Decrease fan speed button for reducing speed of

motor from high speed (P) down to speed 1.

= Increase fan speed button for increasing speed of

motor from 1 to 9 and high speed (P).

● If the hood fails to operate correctly, briefly disconnect it

from the mains power supply for almost 5 sec. by pulling

out the plug. Then plug it in again and try once more

before contacting the Technical Assistance Service.

●●

●

Always press the Always press the

Always press the

key before disconnecting the hood key before disconnecting the hood

key before disconnecting the hood

from the mains supplyfrom the mains supply

from the mains supply

1.1.

1. Control panel

2.2.

2. Lighting units

3.3.

3. Metal grease filters

4.4.

4. Telescopic chimney

5.5.

5. Outlet grids for

Filter version

iew of the hoodiew of the hood

iew of the hood

Bild 8Bild 8

Bild 8