Technical data

7
Changing the light
Disconnect the cooker hood from the main supply before changing the light.
To change the light (Fig. 6):
● Remove the lamp cover, use a screw driver.
● Replace the old bulb with a new one of the same type.
● Remount the lamp cover.
After approximately three years of use, the KF8 filter should be replaced with
a new, as the odour reduction capacity will be reduced.
To remove the filter (Fig. 4):
● Remove the grease filters.
● Press the red buttons (A), lower the front of the carbon filter.
● Remove the carbon filter.
● Replace in reverse order.
Fig. 6
Fig. 4
Clean the filters regularly. The grease that collects in the filters
and the duct could ignite if a hot plate is left on (or if overheating
occurs).
A A
Remove the upper glass panel
The upper glass panel can be removed for cleaning (Fig. 5):
● Remove the grease filters
● Pull the handle L down
● Remove the glass panel
L
Fig. 5