User manual

First engage the hand brake and be sure the
vehicle is not in gear. On vehicles with auto-
matic transmission put the car into “P“ for
parking lock. Turn the ignition to II, do not start
the engine!
Plug in the monitor by plugging the monitor
cable into the 12 V vehicle outlet. Press the
button to power on the monitor. The sym-
bol ( ) on the button must light up blue.
Now put the vehicle into reverse. The trans-
mitted camera image will now be displayed
on the monitor.
Use the buttons ( + ) and ( - ) to
increase, decrease or advance the following
menu items:
Brightness: adjusts the monitor brightness
Contrast: adjusts the monitor contrast
Color: adjusts the monitor's color intensity
Direction: adjusts the monitor display. Adjust
image upside down and left / right
Guidelines: can be activated or deactivated
Language: set language to English / German
Exit: leave menu mode
In "Exit" mode press a ( + ) or( - )
button to leave the menu mode.
Push the On / Off key so the symbol ( )
on the key lights up blue.
Press the (M) button to access menu mode
The display will now show the menu settings for
approx. 7 seconds. The respective adjustment
mode will be displayed in yellow font.
Each time the button (M) is pressed again the
menu will advance to the next level of settings.
Guidelines On / Off
Direction
Colour
Contrast
Brightness
Language English / German
Exit
14
12
13
15
16
14
12
13
15
16
17
17
12
13
14
15
14
15
12
3
2
Unscrew the retaining screw.
Remove the contact cap, spring and the
1 A (Ampere) fuse.
Assemble all parts and the new 1 A fuse in the
order shown and tighten the retaining screw.
Image 15
Contact cap
Spring
12 V plug
Vehicle connector
Fuse 1 A (Ampere)
Retaining screw
4.6 Replacing fuses
4.5 Testing the backup camera system
Image 14
4.4 Monitor menu settings
Power on the monitor before using the backup
camera and off after use.
On / Off button, lights up blue when
the monitor is powered on
Menu button for selecting the respective
adjustment mode
Forward / increase button
Back / decrease button
Guides (distance guides) on the display
to assist with reversing
Display image
Image 13
4.3 Monitor operation
24