Owner manual

Main ovan

Cleaning the

lamp cover(s)

or replacing

the oven

lamp(8) in the

main oven

Oven

lighting

If your oven has a catalytic roof sides and back panel either as

standard equipment or if you have bought these parts separately

and fitted them, then the following information will be of interest to

you.

The liners help to keep the oven cleaner as they clean themselves

to a great extent during roasting and baking at temperatures

above 200 “C. As cleaning may be improved by exposure to a

higher temperature it may be necessary to run the oven at 250 °C

for 1 or 2 hours per week. Before carrying out such a heat cycle,

remove all oven equipment and make sure that you have cleaned

the unlined surfaces to prevent any soil from baking on. For isolat

ed stubborn stains use a soft bush and very hot soapy water,

Never use abrasive cleaners or scouring powders.

Wamingt Isolate the oven from supply before replacing

the oven lamp(s).

To clean the glass coverfs) or change tfie oven lamp(s) the

glass cover(s> should only be undipped by hand. Do not

use tools of any kind.

After cleaning the lamp cover{s) or changing the light bulb(s) refit

the lamp cover{s).

You can illuminate the oven for cleaning. To do this, turn the

oven control knob or the cooking method selector to the lamp po-

sitìon [^..

■ Thorough cleaning

For thorough cleaning, you can remove various parts: