User manual

To support this self-cleaning process
heat the oven without any food
regularly:
1.
Open the oven door.
2.
Remove all accessories from the
oven.
3.
Close the door.
4.
Set an oven function.
5.
Set the oven temperature to 250 °C
and let the oven operate for 1 hour.
6.
Clean the oven cavity with a soft and
damp sponge.
CAUTION!
Do not attempt to clean catalytic
surfaces with oven sprays, abra-
sive cleaners, soap or other
cleaning agents. This may dam-
age the catalytic surface.
Discolouration of the catalytic
surface has no effect on catalytic
properties.
11.3 Cleaning the oven door
The oven door has two panels of glass
installed one behind the other. To make
the cleaning easier remove the oven
door.
WARNING!
The oven door can close if you
try to remove the internal panel
of glass when the door is still as-
sembled.
WARNING!
Make sure that the glass panels
are cool, before you clean the
glass door. There is risk that the
glass breaks.
WARNING!
When the door glass panels are
damaged or have scratches, the
glass becomes weak and can
break. To prevent this you must
replace them. For more instruc-
tions, contact your local Service
Centre.
Removing the oven door and the glass panel
1.
Open the door fully and hold the
two door hinges.
18
www.aeg.com