User manual

• If you change from liquid gas to natu-
ral gas, undo the by-pass screw ap-
proximately 1/4 of a turn (1/2 of a turn
for the Triple Crown burner).
WARNING!
Make sure the flame does not go
out when you quickly turn the
knob from the maximum position
to the minimum position.
13.7 Oven injector replacement
AB
1.
Remove the bottom plate of the
oven cavity (A) to get access to the
oven burner (B).
C
2.
Release the screw (C) which keeps
the burner in position.
D
F
E
3.
Carefully move the burner off the in-
jector support (D).
Slowly move it to the left side. Make
sure that the burner bush stays on
the burner mouthpiece. Do not ap-
ply force to the wire of the spark
plug connector (E) and to the ther-
mocouple conductor (F).
4.
Release the burner injector (D) with
a 7 mm socket spanner and remove
it. Replace it with the necessary one.
5.
Assemble the burner in the oppo-
site sequence.
6.
Replace the gas type sticker near
the gas supply ramp with the one
related to the new gas type.
Minimum level adjustment of the oven
burner:
1.
Remove the knob for the oven func-
tions.
ENGLISH 25