User manual

English
36
4. Now enter the password “0000” in your player,
depending on the device manufacturers, model, and
software version.
After successful registration, a beep will sound and the PAIR
indicator lamp will light up. For the further procedure, please
refer to the user manual of the playback unit. If possible,
adjustthevolumeoftheexternalunittoacomfortablelevel.
NOTE:
• Dependingonthedevicemanufacturer,youneedto
perform the registration (PAIRING) again to connect the
devices.
• TheBluetoothcompatibilitycannotbeensuredfor
devices (e.g. mobile phones) getting released in the
future.
• Toensureanoptimalconnection,makesurethatthe
battery of your player is completely charged.
• Someofthemobilephonebrandshaveanenergy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• Tobeabletotransferaudiodata,Bluetoothneedsto
stay activated in your player. Observe the operation
manual of your player.
• Ifamobilephoneonwhichyouareplayingmusic
receives a call, the music will be interrupted. The sound
however is not played back via the speaker. After you
have ended the call, the devices are connected to each
other again and playback continues.
USB port (9)
This device has been developed in line with the latest techni-
cal advances in the USB field. The wide range of different
USB storage devices of all types which are currently on the
market, unfortunately do not allow us to guarantee full com-
patibility with all USB storage devices. For this reason, in rare
cases there may be problems in playing back files from USB
storage devices. This is not a malfunction of the device.
1. Connect a USB storage device directly into the port.
2. Select the USB port with the FUNC./LIGHT button (- 1 -).
Playback will automatically start after a few seconds.
For operation, please refer to the section “Description of the
controls”.
NOTE:
• Alwaysdirectly connect a USB storage medium to the
USB port to prevent any malfunctions.
• TheUSBportisnot designedforchargingexternal
devices.
CAUTION:
Switch the device to a different operating mode before you
remove the USB storage device.
Description of the controls
NOTE:
Depending on your playback unit, not all functions might
be supported.
/PAIR/ (12)
• Youcanpauseandcontinuemusicplayback.Pressagain
to continue playback.
• HoldthebuttondepressedinBluetoothmodetodiscon-
nectanexistingBluetoothconnection.
• Toreactivatethedeviceafterthedevicehasturneditself
off after 15 minutes with a too weak or no signal.
(11)
Press1x= Restartofthesongfromthebeginning.(Not
during USB-mode)
Press2x= Skiptotheprevioussong.
Press3x= Skiptothesongbeforetheprevioussong.
When you hold down the button in USB mode, a music
search is started.
(13)
Presstoskiptothenextsongandthefollowingsongs.
When you hold down the button in USB mode, a music
search is started.
Cleaning
CAUTION:
Do not submerge the device in water.
• Beforecleaningdisconnectfrommainspowersupply.
• Cleanthedevicewithasoftdampclothwithoutdeter-
gents.
Troubleshooting
Fault Cause Solution
Unit cannot
be operated.
Unit crashes and
“hangs”.
Disconnect from the
mains for around
5 seconds. Then
switch the unit on
again.
No audio
signal via the
Bluetooth
connection.
Speaker is not paired
to the audio source.
Check whether a
connectionexists.If
necessary, pair the
speaker again to the
audio source.
Volume too low. Increase the volume
on the speaker.
Increase the volume
on the audio source.