User manual

Clean the appliance and the accessories
before first use.
Put the accessories and the removable
shelf supports back to their initial
position.
4.2 Preheating
Preheat the empty appliance to burn off
the remaining grease.
1. Set the function and the
maximum temperature.
2. Let the appliance operate for 1 hour.
3. Set the function and set the
maximum temperature.
4. Let the appliance operate for 15
minutes.
5. Set the function and set the
maximum temperature.
6. Let the appliance operate for 15
minutes.
Accessories can become hotter than
usual. The appliance can emit an odour
and smoke. This is normal. Make sure
that the airflow in the room is sufficient.
5. HOB - DAILY USE
WARNING!
Refer to Safety chapters.
5.1 Heat setting
Symbols Function
Off position
Double zone
Keep warm
1 - 9 Heat settings
Use the residual heat to
decrease energy
consumption. Deactivate the
cooking zone approximately
5 - 10 minutes before the
cooking process is
completed.
Turn the knob for the selected cooking
zone to a necessary heat setting.
To complete the cooking process, turn
the knob to the off position.
5.2 Activating and
deactivating the outer rings
You can adjust the surface you cook to
the dimension of the cookware.
To activate the outer ring: turn the
knob clockwise through a light resistance
to . Then turn the knob
counterclockwise to the correct heat
setting.
To deactivate the outer ring: turn the
knob to the off position. The indicator
goes out.
5.3 Residual heat indicator
WARNING!
There is a risk of burns from
residual heat.
The indicator comes on when a cooking
zone is hot.
6. HOB - HINTS AND TIPS
WARNING!
Refer to Safety chapters.
6.1 Cookware
The bottom of the cookware
must be as thick and flat as
possible.
Cookware made of
enamelled steel and with
aluminium or copper
bottoms can cause the
colour change on the glass-
ceramic surface.
ENGLISH 9