User manual

English
63
2. Insert one battery of the type CR2032, 3 V. Mind the correct polarity ( must be at the
top)!
3. Close the battery case. Secure the battery compartment lid again with the screw.
4. Ifthedeviceisnotusedforanextendedperiodoftime,removetheBatteryfromthe
device to avoid any leaking of battery acid.
WARNING:
Thebatteriesshallnotbeexposedtoexcessiveheatsuchassunshine,reorthelike.
Danger of explosion!
CAUTION:
Batteries are not to be disposed of together with domestic wastes. Dispose of the used
batteries at the relevant collection bin or at your dealer’s.
Power supply
• Makesurethegridvoltagecorrespondstotheguresontheratingplate.
• Insertthegridplugintoaproperlyinstalledpowersocket.
• Ifyouhavenotinsertedabackupbattery,thestoredclocktimewillbelostassoonas
the power supply is interrupted.
Switching the Unit On/Off
Press the
button (5) to switch the unit on or off.
Volume
Adjust the volume with the
/ (7) and (8).
Display Brightness
Use the SNOOZE/SLEEP / DIMMER button (1) to adjust the display brightness.
Turn off display light
If you are disturbed by even the lowest brightness setting of the light, you can turn it off.
• Instandby,keepthe
button(8)pressedforapprox.3seconds.Thesymbol (14) will
appearbesidethedisplay.Thedisplaylightturnsoffafterapprox.15seconds.
NOTE:
Press any button to switch on the brightness again for 15 seconds.