User manual

English
64
• Switch on the display light: To switch on the display light again permanently, press
anybuttonbriey.Thenkeep button(8)pressedforapprox.3seconds.Thesymbol
goes out.
Displaying diverse information
1. Switch the device to standby using the
button (5).
2. Brieypressthe Y-M-D / C-F button (10) repeatedly. The following information is
displayed in succession:
Year
Date Temperature Humidity
If the button is no longer pressed, the display will switch back to time after about 5 sec-
onds.
Toggling the display
The following can be shown alternatingly on the display:
Time
Date Year Temperature Humidity
1. In order to activate this function, use the
button (5) to switch the device to standby.
2. Keep the / button (7) pressed, until “ “appearsbrieyonthedisplay.
Switch off toggling: To switch off Auto Toggle, keep the
/ button pressed again in
standby. “
“appearsbrieyonthedisplay.
NOTE:
Only the time is shown via the rotatable projector (16).
Toggle temperature display between °C (Celsius) and °F (Fahrenheit)
1. Switch the device to standby using the
button (5).
2. Brieypressthe
Y-M-D / C-F button (10) repeatedly until the temperature is dis-
played.
3. While the temperature is displayed, press the Y-M-D / C-F button for about 3 sec-
onds to switch between °C and °F.
Weather display (3)
The device does not just determine the room temperature and the humidity using the sen-
sor(22),butitcanalsocreateanapproximateweatherforecastforthenext12to24hours.
However, the measurement can deviate from the actual weather conditions.
1. To do so, set up the device near an open window.
2. After about 3 hours, the device will have adjusted to the weather conditions.