User manual

English

4. Press the NAP/M+ /MEM button to preset the station.

Tune into the preset station

Press the

NAP/M+ /MEM button (6) repeatedly in radio mode to scan through the

preset station memory.

Alarm function

Setting of the Alarm (in standby)

You can set two alarm times. Proceed as follows:

1. Press the

button (12). The currently set alarm time is shown.

2. Keep the buttonpressedforapprox.3secondswhenthealarmtimeisdisplayed.

Thehoursofthecurrentlysetalarmtimestarttoash.

3. Use the buttons DST (9) and Y-M-D /C-F (10) for setting.

4. Press the buttonforconrmation.Theminutesstarttoash.

5. Use the buttons DST and Y-M-D /C/F for setting.

6. Now select the days you want the alarm to sound. The following selections can be

made:

• 1-5=MondaytoFriday

• 1-7=MondaytoSunday

• 6-7=SaturdayandSunday

• 1-1=Weekday

6a. When you have selected the setting 1-1:

1. Press the button to select the weekday.

2. Make your selection with the buttons DST and Y-M-D/C-F.(1=Monday,

2=Tuesday,3=Wednesday,4=Thursday,5=Friday,6=Saturday,7=Sunday)

7. Press the

button to conﬁrm. Then select how you want to be awakened. Select

from:

• “bu” (buzzer):

A buzzer sounds when the alarm time is reached. The buzzer interval increases

from slow to fast. The volume cannot be adjusted.

• Radio frequency is displayed:

As soon as your set alarm time is shown, the radio switches on. The last set station

is played. The volume increases slowly to the set volume. The volume cannot be

adjusted.

NOTE:

Thealarmfunctionturnsoffautomaticallyafter30minutesuntilthenextday.