User manual

English
67
7a. Ifyouwanttobeawakenedbyaradiostation,selectthemaximumalarmvolumeusing
the DST and Y-M-D /C-F buttons.
8. Finally, press the button again. The first alarm time is now activated.
To set the second alarm time, repeat the above steps with the
button (11).
NOTE:
• Thesymbol (13), respectively (4) will light up with an activated alarm time.
• Inordertobrieydisplaythesetalarmtimes,pressthe , respectively the button.
Turning off the Alarm
Press the
button (5) to stop the alarm.
Automatic Alarm Interval
Theautomaticallysetalarmfunctioncanbeshutoffforapproximately9minuteswiththe
SNOOZE/SLEEP / DIMMER button (1).
NOTE:
The respective symbol
, respectively will blink with activated snooze function.
Deactivate the Alarm Function
1. Switch the device to standby with the
button (5).
2. To deactivate the alarm function, keep the
button (12) or button (11) pressed. The
symbol
(13), respectively (4) will go out.
Delayed Shut-Off
You can use the function for delayed power-off with radio operation. The unit is switched
off automatically when the selected time is reached.
• Selectthetimeafterwhichtheunitisswitchedoffbyrepeatedlypressingthe
SNOOZE/SLEEP/DIMMER button (1). The following selections can be made: 90, 60,
30, and 15 minutes. The OFF setting (off) deactivates this function.
• Thisfunctioncanbecancelledwiththe
button (5).
Nap alarm
The nap alarm can be used for e.g. a short “nap”. The function only operates in standby.