User manual

English
68
• Pressthe NAP/M+ /MEM button repeatedly (6) to select the time after which the
device will beep. Select from 90 to 10 minutes or OFF (off) in steps of 10 minutes.
• Aftertheselectedtimehaselapsed,anincreasinglyfastbeepwillsound.Usethe
button (5) to turn off the beep.
Projection
With this unit, you can project the time onto a wall or the ceiling.
• YoucanswitchthisfunctiononandoffwiththeON/OFF/PROJECTIONbutton(17).
• Rotatetheprojector(16)tothedesiredposition.
• Adiallocatedonthetopoftheprojectorcanbeusedtoadjustthesharpnessofthe
projected display.
• Youcanusethe180°FLIPbutton(18)toiptheprojectionby180degrees.
Cleaning
CAUTION:
Do not dip the appliance in water.
• Removetheplugbeforecleaning.
• Cleantheappliancewithaslightlyhumidclothwithoutanyadditives.
Troubleshooting
Problem Cause Solution
The unit cannot be
operated
The unit is blocked and
“hangs”
Pull the mains plug out for about
5 seconds. Then turn the device on
again.
Technical Data
Model: ................................................................................................................................. MRC 4141 P
Power supply: ....................................................................................................................230 V~ 50 Hz
Power consumption:.........................................................................................................................5 W
Battery power reserve: ...................................................................................................... 3 V, CR2032
Protection class: ......................................................................................................................................II
Net weight: ................................................................................................................. approx.0.467kg