User manual

52
English
DVD4556LCD_IM 16 .12.16
Password
This menu allows you to change the password for the parental lock.
To change the password first enter the old password. The master password is
“1369”.
NOTE:
In case you forget your password you can deactivate the parental lock with the
master password.
Follow these steps to change the password:
1. Enter the current password with the numeric buttons (Fig. 3/22) on the
remote control in the field “Old Password”.
The screen shows “XXXX” to avoid that unauthorized person can read the
password.
2. Enter the new password with the numeric buttons on the remote control in
the field “New password”.
3. Enter the new password again in the filed “Confirm Password”. Press the
ENTER button (Fig. 3/18) to confirm.
Troubleshooting
Consult the following table to troubleshoot errors prior to sending the device to customer service.
Errors Cause Solution
Network display light not on Lack of power supply
(AC adapter not supplied)
WARNING:
Turn off the device prior to troubleshooting.
Check if the mains plug is connected correctly. If neces
-
sary, test the outlet with another device for functionality.
No power supply/ main switch
turned off
Turn the device back on again with the main switch
(Fig. 1/15; 2/2).
No screen display TV operation:
Video cable incorrectly con
-
nected.
WARNING:
Turn of the device prior to troubleshooting.
Check the proper position of the video cable. Check if
the plug is plugged tightly into the out let.
No DVD/CD inserted Insert CD/DVD.
DVD/CD incompatible Use compatible media only.
DVD/CD placed upside down
into CD/DVD-compartment
Turn CD/DVD around.
CD/DVD is soiled Clean CD/DVD.
CD/DVD is damaged Use another CD/DVD.
Default settings incorrect Check the default settings of the DVD-Players.
Child safety is activated Deactivate child safety.
No reaction upon pressing Power supply issues or static
charge of the device.
Turn off the main switch and disconnect the device from
the power supply. Restore the power supply and switch
on the device again.