User manual

The indicator of the cooking zone
flashes slowly. The timer starts to
count down.
4.
To see the remaining time, touch
again and again until the indicator
for the necessary cooking zone flash-
es quickly. The display shows the re-
maining time.
When the set time ends, 00 flashes
and an acoustic signal sounds. The
cooking zone deactivates.
5.
Touch to stop the signal.
To deactivate the timer before
the set time is completed, set the
cooking zone with
and touch
-. The remaining time counts
down to 00. The indicator of the
cooking zone goes out.
You can use the timer as a Minute Mind-
er when the cooking zones do not oper-
ate. To do this, set the cooking zone and
activate the timer but do not set the
heat setting.
5.8 STOP+GO
The function sets all cooking zones
that operate to a Keep Warm setting (
).
When
operates, you cannot change
the heat setting.
does not stop the timer function.
•
To activate this function touch .
comes on.
•
To deactivate this function touch .
The heat setting that you set before
comes on.
5.9 Lock
When the cooking zones operate, you
can lock the control panel. It prevents an
accidental change of the heat setting.
This function does not deactivate the
timer function.
1.
Set the heat setting.
2.
To activate this function, touch .
The display shows the symbol
for
4 seconds.
3.
To deactivate this function, touch
. The display shows the heat setting
that you set before.
When you deactivate the appli-
ance, the function is deactivated.
5.10 Child safety lock
This function prevents an accidental op-
eration of the hob.
Activating the child safety lock
1.
Make sure that the hob is deactiva-
ted. There must be no symbols
shown in the control panel, except
for
/ / .
2.
Touch for 4 seconds. The symbol
flashes in the control panel.
3.
Touch while the symbol flash-
es.
4.
The display shows for 4 seconds.
The child safety lock is activated.
To deactivate the child safety
lock, do the steps again. The dis-
play shows
for 4 seconds. The
child safety lock is deactivated.
Deactivating the child safety lock for
one cooking session
1.
Activate and deactivate the necessa-
ry cooking zone.
2.
While the display shows , touch
until the display shows .
3.
Set the heat setting for the cooking
zone in less than 4 seconds.
4.
When you deactivate the hob, the
child safety lock operates.
5.11 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
\ \ Risk of burns from
residual heat!
OptiHeat Control indicates the level of
the residual heat. The induction cooking
zones make the heat necessary for cook-
ing directly in the bottom of the cook-
ware. The glass ceramic is heated by the
heat of the cookware.
5.12 Automatic switch-off
The hob deactivates automatically if:
•
All cooking zones are deactivated
.
ENGLISH 11