User manual

Problem Possible cause Remedy
The cooking zone re-
duces the heat setting to
You covered one or
more sensor fields or
there is water or fat
stains on the control
panel.
Uncover the sensor
fields. Clean the control
panel
A sound operates when
the appliance is off
You covered one or
more sensor fields
Uncover the sensor
fields.
Heat setting alternates The Power management
is active
See the section Power
management
A sound operates and
appliance starts and
stops again. After 5 sec-
onds one more sound
operates
You covered
Uncover the sensor field
comes on
The automatic switch-off
operates
Stop the appliance and
start it again
comes on
Overheating protection
for the cooking zone op-
erates
Switch off the cooking
zone. Switch on the
cooking zone again
comes on
No cookware on the
cooking zone
Put cookware on the
cooking zone
comes on
Not correct cookware Use the correct cook-
ware
comes on
The diameter of the bot-
tom of the cookware is
too small for the cooking
zone
Move cookware to a
smaller cooking zone
and number come on
There is an error in the
appliance
Disconnect the appli-
ance from the electrical
supply for some time.
Disconnect the fuse from
the electrical system of
the house. Connect
again. If
comes on
again, speak to the After
Sales Service
ENGLISH 33