User manual

Removing the shelf supports
1.
Pull the front of the shelf support
away from the side wall.
2
1
2.
Pull the rear end of the shelf sup-
port away from the side wall and re-
move it.
Installing the shelf supports
Install the shelf supports in the opposite
sequence.
Valid with telescopic runners:
The retaining pins on the tele-
scopic shelf runners must point
to the front!
CAUTION!
Make sure that the longer fixing
wire is in the front. The ends of
the two wires must point to the
rear. Incorrect installation can
cause damage to the enamel.
11.3 Cleaning the top oven
glass panels
The door glass on your product
can be different in type and
shape from what you see in dia-
grams. The number of glasses
can be different.
1
2
1
Removing the glass:
1.
Open the door.
2.
Push the door trim at both sides to
release the clips. Refer to the pic-
ture.
3.
Pull the door trim to the front to re-
move it.
4.
Remove the glass panels.
To install panels, do the above
steps in the opposite sequence.
28
www.aeg.com