Manual
4.
To see the remaining time, touch
again and again until the indicator for
the necessary cooking zone flashes
quickly. The display shows the re-
maining time.
When the set time ends, 00 flashes
and an acoustic signal sounds. The
cooking zone deactivates.
5.
Touch to stop the signal.
To deactivate the timer before the
set time is completed, set the
cooking zone with
and touch -.
The remaining time counts down
to 00. The indicator of the cook-
ing zone goes out.
You can use the timer as a Minute Minder
when the cooking zones do not operate.
To do this, set the cooking zone and acti-
vate the timer but do not set the heat set-
ting.
STOP AND GO
The Stop and Go function sets all
cooking zones that operate to the lowest
heat setting (
).
This function does not deactivate the tim-
er function.
•
To activate this function, touch
. The
display shows the symbol
.
•
To deactivate this function, touch
.
The display shows the heat setting that
you set before.
When the Stop and Go function
operates, you cannot change the
heat settings.
LOCK
When the cooking zones operate, you can
lock the control panel but not
. It pre-
vents an accidental change of the heat
setting.
This function does not deactivate the tim-
er function.
1.
Set the heat setting.
2.
To activate this function, touch .
The display shows the symbol
for
4 seconds.
3.
To deactivate this function, touch .
The display shows the heat setting
that you set before.
When you deactivate the appli-
ance, the function is deactivated.
When you activate the appliance, the dis-
play shows SAFE .
The lock function locks or unlocks
the oven interface at the same
time.
RESIDUAL HEAT INDICATOR
The residual heat indicator comes on
when a cooking zone is hot.
WARNING!
There is a risk of burns from resid-
ual heat.
CHILD SAFETY DEVICE
This function prevents an accidental oper-
ation of the hob.
Activating the child safety device
1.
Touch to activate the hob. Do not
set the heat settings.
2.
Touch for 4 seconds. The display
shows the symbol
. The child safe-
ty device operates.
3.
Touch to deactivate the hob.
Deactivating the child safety device
1.
Touch to activate the hob. Do not
set the heat settings.
2.
Touch for 4 seconds. The display
shows the symbol
.
3.
Touch to deactivate the hob.
Overriding the child safety device for
one cooking session
1.
Touch to activate the hob. The
display shows the symbol
.
2.
Touch for 4 seconds.
3.
Set the heat settings in less than 10
seconds. You can operate the hob.
4.
When you deactivate the hob, the
child safety device operates again.
The child safety device function
locks the hob and oven at this
same time.
AUTOMATIC SWITCH-OFF
The hob deactivates automatically if:
ENGLISH
11