User's Manual

Heat- up indicator

If you switch on an oven function, the bars on the display come on one by one. The bars

show that the oven temperature increases.

Residual heat indicator

When you switch off the oven, the bars on the display show the residual heat.

OVEN - CLOCK FUNCTIONS

Clock functions

7 6 5

2 3 4

1 Time of day

2 Duration

3 End

4 Minute Minder

5 Setting button (Plus)

6 Setting button (Minus)

7 Selection button

SYMBOL FUNCTION DESCRIPTION

Minute Minder To set a countdown (max. 99 minutes). This function has no

effect on the operation of the appliance.

Duration To set how long the appliance has to be in operation.

End To set the switch-off time for an oven function.

You can use Duration and End at the same time, if the ap-

pliance is to be switched on and off automatically later.

Time of day To set, change or control the time of day.

• If you set a clock function, the symbol flashes for approximately 5 seconds. In these 5

seconds, touch

or to set the time.

• If you set the time, the symbol continues to flash for approximately 5 seconds. After

these 5 seconds, the symbol comes on. The time starts to count down.

Setting the clock functions

1. Switch on the appliance.

2. Use

again and again until the display shows the necessary clock function and the

related symbol, for example Minute Minder

3. Use

or to set the necessary time.

Oven - Clock functions