User's Manual

Setting the time
The oven only operates after time set.
When you connect the appliance to the electrical supply or in case of a power cut, the Time
function indicator flashes automatically.
To set the current time use
or button.
After approximately 5 seconds, the flashing stops and the display shows the time of day set.
You can only change the Time of day if :
• the switch-on lock is not on
• none of the clock functions Duration
or End is set
• no oven function is set.
Pre-heating
1. Set function and maximum temperature.
2. Let the appliance operate without the food for approximately 1 hour.
3. Set function
and maximum temperature.
4. Let the appliance operate without the food for approximately 10 minutes.
5. Set function
and maximum temperature.
6. Let the appliance operate without the food for approximately 10 minutes.
This is to burn off the residue in the appliance. The accessories can become more hot than
usually. When you pre-heat the appliance for the first time, the appliance can make an
odour and smoke. This is the usual effect. Make sure the airflow is sufficient.
HOB - DAILY USE
WARNING!
Refer to "Safety information" chapter.
Control panel layout
1 2 73 4 5 6
891011
Hob - Daily Use 9