User manual

Sensor field Function
5
The timer display To show the time in minutes.
6
/
To increase or decrease the heat set-
ting.
7
To activate the Power function.
8
/
To increase or decrease the time.
9
To select the cooking zone.
10
To activate and deactivate the STOP
+GO function.
5.2 Heat setting display
Display Description
The cooking zone is deactivated.
-
The cooking zone operates.
The STOP+GO / Keep warm function operates.
Not correct cookware or too small cookware or no
cookware on the cooking zone.
There is a malfunction.
A cooking zone is still hot (residual heat).
The Lock / The Child Safety Device operates.
The Power function operates.
The Automatic Heat Up function operates.
5.3 Activating and
deactivating the hob
Touch for 2 seconds to activate the
hob. Touch
for 1 second to deacti-
vate the hob.
5.4 Heat setting
Touch to increase the heat setting.
Touch
to decrease the heat setting.
The display shows the heat setting.
Touch
and at the same time to
deactivate the cooking zone.
5.5 Automatic Heat Up
You can get a necessary heat setting in a
shorter time if you activate the Automat-
ic Heat Up function. This function sets
the highest heat setting for some time
(see the graphic), and then decreases to
the necessary heat setting.
To start the Automatic Heat Up function:
1.
Touch . comes on in the dis-
play.
2.
Touch again and again until
comes on in the display.
3.
Immediately touch again and
again until the necessary heat set-
ting comes on. After 3 seconds
comes on in the display.
To stop the function touch
.
10
www.aeg.com