User manual

5.15 Power management
function
• All cooking zones are connected as
on the illustration.
• The hob and both ovens are
connected to one phase.
• The phase has a maximum electricity
load.
• The function divides the power within
the appliance. The oven is more
important than the hob.
• The function activates when the total
electricity load in the appliance is
exceeded.
• The function decreases the power on
the cooking zones to prevent a circuit
overload.
• The heat setting display of the
reduced zones changes between two
levels.
6. HOB - HINTS AND TIPS
WARNING!
Refer to Safety chapters.
6.1 Cookware
For induction cooking zones
a strong electro-magnetic
field creates the heat in the
cookware very quickly.
Use the induction cooking
zones with correct cookware.
Cookware material
• correct: cast iron, steel, enamelled
steel, stainless steel, the bottom
made of multi-layer (with correct mark
from a manufacturer).
• not correct: aluminium, copper,
brass, glass, ceramic, porcelain.
Cookware is correct for an induction
hob if:
• some water boils very quickly on a
zone set to the highest heat setting.
• a magnet pulls on to the bottom of
the cookware.
The bottom of the cookware
must be as thick and flat as
possible.
Cookware dimensions
Induction cooking zones adapt to the
dimension of the bottom of the
cookware automatically to some limit.
The cooking zone efficiency is related to
the diameter of the cookware. The
cookware with a smaller diameter than
the minimum receives only a part of the
power generated by the cooking zone.
6.2 Minimum cookware
diameter
Cooking zone Cookware diam-
eter (mm)
Left rear 125 - 210
Right rear 125 - 210
Right front 125 - 210
Left front 125 - 210
6.3 The noises during
operation
If you can hear:
• crack noise: cookware is made of
different materials (sandwich
construction).
• whistle sound: you the cooking zone
with high power level and the
cookware is made of different
materials (sandwich construction).
ENGLISH
13