User manual

ENGLISH 23
Changing the flexible gas hose
In order to guarantee that the gas hose is
always in excellent condition we strongly
recommend changing it on the date you
will find printed on it.
Replacing the electrical
coponents
• The rear protection will have to be
removed in order to change the
electrical heating elements, spit
motor, terminal board and power
cable.
• If you have to change the power cable
(see the cross section on table in the
“Technical information” section),
always keep the earth wire longer
than the phase wires and, in addition,
6. TECHNICAL INFORMATION
Outside cooker dimensions
MODEL
height
1 /mm
height
2 /mm
width
3 /mm
depth
4 /mm
100 x 60 910 ÷ 920 970 ÷ 980 1000 600
follow all the instructions given in the
“Electrical connection” paragraph.
• To change the oven lamp see the
instructions given “Replacing the oven
lamp” paragraph.
• To change the spark generator, the
spark electrodes and the lamp holder
the work top has to be removed as
indicated in paragraph “Replacing the
taps”.
• To change the lamp-holder force the
tabs of blockage and take the lamp-
holder toward the inside of the oven.
• To change the eventual programming
accessory, the thermostat,
commutators, the switchs and the
microswitchs, remove the front panel
as indicated in paragraph “Replacing







 