User manual

Display Description
A cooking zone is still hot (residual heat).
The Lock / The Child Safety Device operates.
The Power function operates.
The Automatic Heat Up function operates.
5.3 Activating and
deactivating the hob
Touch for 2 seconds to activate the
hob. Touch
for 1 second to deacti-
vate the hob.
5.4 Heat setting
Touch to increase the heat setting.
Touch
to decrease the heat setting.
The display shows the heat setting.
Touch
and at the same time to
deactivate the cooking zone.
5.5 Automatic heat up
The automatic heat up function lets you
get the necessary heat setting in a short-
er time. It sets the highest heat setting
for some time (refer to the diagram), and
then decreases it to the necessary heat
setting.
1
2
3
4
5
6
7
8
9
10
11
0
123456789
To start the automatic heat up:
1.
Touch . comes on in the dis-
play.
2.
Immediately touch . comes on
in the display.
3.
Immediately touch again and
again until the necessary heat set-
ting comes on. After 3 seconds
comes on in the display.
4.
To deactivate the function touch .
5.6 Power function
The Power function makes more power
available to the induction cooking zones.
The Power function is activated for 10
minutes at most. After that, the induc-
tion cooking zone automatically changes
back to the highest heat setting. To acti-
vate, touch
. comes on in the dis-
play. To deactivate, touch
or .
5.7 Power management
The power management divides the
power between two cooking zones in a
pair (see the illustration). The Power
function increases the power to the max-
imum level for one cooking zone in the
pair and decreases the power in the sec-
10
www.aeg.com