User manual

Problem Possible cause Remedy
The hob deactivates. You put something on the
sensor field .
Remove the object from the
sensor field.
Residual heat indicator does
not come on.
The zone is not hot because
it operated only for a short
time.
If the zone operated suffi-
ciently long to be hot, speak
to an Authorised Service
Centre.
Automatic Heat Up function
does not operate.
The zone is hot. Let the zone become suffi-
ciently cool.
Automatic Heat Up function
does not operate.
The highest heat setting is
set.
The highest heat setting has
the same power as the func-
tion.
The sensor fields become
hot.
The cookware is too large or
you put it too near to the
controls.
Put large cookware on the
rear zones if possible.
comes on the hob dis-
play.
Automatic Switch Off oper-
ates.
Deactivate the hob and acti-
vate it again.
comes on the hob dis-
play.
The Child Safety Device or
the Lock function operates.
Refer to "Hob - Daily use"
chapter.
comes on the hob dis-
play.
There is no cookware on the
zone.
Put cookware on the zone.
comes on the hob dis-
play.
The cookware is incorrect. Use the correct cookware.
Refer to "Hob - Hints and
tips" chapter.
comes on the hob dis-
play.
The diameter of the bottom
of the cookware is too small
for the zone.
Use cookware with correct
dimensions.
Refer to "Hob - Hints and
tips" chapter.
The oven does not heat up. The oven is deactivated. Activate the oven.
The oven does not heat up. The clock is not set. Set the clock.
The oven does not heat up. The necessary settings are
not set.
Make sure that the settings
are correct.
The oven does not heat up. The automatic switch-off is
activated.
Refer to "Automatic switch-
off".
The oven does not heat up. The Child Safety Device or
the Lock function operates.
Refer to "Hob - Daily use"
chapter.
The oven display shows
"SAFE".
The Child Safety Device
function operates.
Refer to "Hob - Daily use"
chapter.
www.aeg.com32