Datasheet

9
sec
11
sec
12
sec
5
sec
7
sec
78
ACCESSORIES
WB1 SET – SCREWDRIVER ANGLE ATTACHMENT WITH 10 SCREWDRIVING BITS
•
Contents: WB1 and screwdriving bits 25 mm PH1 / PH2 / PZ1 / PZ2 (2pcs) / TX15 / TX20 / Hex 4 / Hex 5
•
Being only 30 mm high it is ideally suited to working in confined and limited spaces
•
Fits to all machines. The ¼˝ Hex shank fits directly into the chuck preventing slippage
•
Magnetic ¼˝ Hex reception. Accepts standard ¼˝ Hex screwdriving bits
•
Adjustable to working situation. 360° variable thumb lever for extra grip
•
Industrial quality up to 11 Nm torque and 400 min
–1
•
Tough gears made of special hardened steel
Art. No.
4932-
EAN No.
4002395-
Counter display (12 x WB1 Sets)
430173
378340
Single WB1 – screwdriver angle attachment with 10 screwdriving bits
430174
378357
MAXI-BIT SCREWDRIVING SET
Art. No.
4932-
EAN No.
4002395-
Counter display (20 x sets)
399494
361144
Single Maxi-Bit screwdriving set (10pcs)
Contents:
SL 0,6 x 4,5 / SL 0,8 x 5,5 / SL 1,5 x 6,5 / PH1 / PH2 / PH3 / PZ1 / PZ2 / PZ3
1
⁄4˝ Hex magnetic bit holder
399493
361151
PROFI-BIT SCREWDRIVING SET
Art. No.
4932-
EAN No.
4002395-
Counter display (20 x sets)
399496
361168
Single Profi-Bit screwdriving set (17pcs)
Contents:
SL 0,8 x 5,5 / SL 1,2 x 6,5 / PH1 / PH2 (2pcs) / PH3 / PZ1 / PZ2 (2pcs) / PZ3 / TX10 / TX15 /
TX20 / TX25 / TX30 / TX40
1
⁄4˝ Hex magnetic bit holder
399495
361175
FIXTEC NUTS
•
FIXTEC: Disc changing in seconds, no extra tools required
•
12 seconds from removing the worn disc to fixing a new disc
•
Only 8 mm thin, enabling more surface of disc on the material
•
Compatible to all manufacturers angle grinders up to 150 mm with standard M14 spindle thread
•
With integrated keyholes, for removal of the nut with a standard pin spanner in the event of the nut becoming too tight
Art. No.
4932-
EAN No.
4002395-
Counter display (12 x FIXTEC Nut)
358936
326693
Single FIXTEC Nut
358225
325528
ACCESSORIES