User Manual

20
GB
English
Keep the oor area free of loose material e.g. chips and cut-os.
Do not use saw blades which are damaged or deformed
Do not use saw blades not corresponding to the key data given in
these instructions for use.
Only use tools that meet standard EN 847-1.
Do not use saw blades made of high-speed steel.
Only use saw blades which have been properly sharpened.
It is necessary to select a saw blade which is suitable for the
material being cut.
It is essential to adhere to the maximum speed specied on the
saw blade.
Transport and store the tools in a suitable receptacle;
Do not use any anges other than those supplied or indicated in the
instruction manual to secure the saw blade.
Never use the mitre saw to cut materials other than those specied
in the instruction manual.
WARNING!
Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, re and/
or serious injury.
Save all warnings and instructions for future reference.
MITRESAW SAFETY WARNINGS
Wear ear protectors. Exposure to noise can cause hearing loss.
Always wear goggles when using the machine. It is recommended
to wear gloves, sturdy non slipping shoes and apron.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Wear gloves!
Before using the tool please read the instructions. If possible have
the tool demonstrated.
Ensure that the machine is always stable and secure (e.g. xed to
a bench)
TECHNICAL DATA
Mitresaw *
PS 216 L PS 254 L
Production code 4522 03 02...
4522 06 02...
... 000001-999999
4522 09 02...
4522 12 02...
... 000001-999999
Rated input 220-240 V, 50 HZ, S6(40%),
1500 W, 6,5 A
220-240 V, 50 HZ, S6(40%),
2000 W, 8,3 A
No-load speed 5000 min
-1
4500 min
-1
Saw blade dia. x hole dia 216 x 30 mm 254 x 30 mm
Saw blade thickness 1,6 mm 1,8 mm
Max. cutting capacity
Mitre 0°/ Inclination 0°
Mitre 45°/ Inclination 0°
Mitre 0°/ Inclination 45°
Mitre 45°/ Inclination 45°
65 x 305 mm
65 x 215 mm
36 x 305 mm
36 x 215 mm
90 x 305 mm
90 x 215 mm
50 x 305 mm
50x 215 mm
Min. workpiece dimensions 130 x 35 x 2,5 mm 130 x 35 x 2,5 mm
Weight according EPTA-Procedure 01/2003 16,7 kg 19,6 kg
Noise information
Measured values determined according to EN 61029-2-9:2009. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A)) 99,2 dB (A) 96,7 dB (A)
Sound power level (Uncertainty K=3dB(A)) 112,2 dB (A) 109,7 dB (A)
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 61029
Sawing of wood: Vibration emission value a
h
3,5 m/s
2
2,133 m/s
2
Uncertainty K= 1,5 m/s
2
1,5 m/s
2
1
PS
=
^
Mitresaw
2
The S6-40% indicates a load prole of 4 min load and 6 min idle time
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for dierent applications,
with dierent accessories or poorly maintained, the vibration emission may dier. This may signicantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is
running but not actually doing the job. This may signicantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the eects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.