User Manual

16
2 sec
ENGLISH
TIMER MEMORY
With the timer, the measurement
can be start delayed. For example
to position a part in the measuring
beam.
Push button
- Icon is displayed.
Timer can be set between
3 to 15 sec by pressing the
button .
Push button
- The seconds are counted down
until the measurement starts.
- At 0, the measurement starts.
The measured values are stored
continuously and automatically in
memory.
The stored values can be retrived
by pushing the button .
Push the button 2 sec.
- Icon and memory number
appears.
- associated measured parameter
is shown.
- Stored value is displayed in the
main line.
- Navigate with the + / - buttons