User manual

English
45
Thinning function
• Slidethebuttontowards“
”.Thebladeispartlycovered.
• Onlythehairswhichmeetthebladerstarecut.
• Slidethebuttontowards“ ”toturnoffthefunction.
Finish Operation
• Switchofftheappliance.“OFF”canbeseenontheswitch(6).
Cleaning and Maintenance
• Regularcleaningandmaintenanceensuresoptimumresultsandlonglifetime.
• Turntheunitoffanddisconnectfrommainspowersupply,ifnecessary.
WARNING:
• Donotsubmergetheunitinwater.
CAUTION:
• Donotuseawirebrushorotherabrasives.
• Donotusesharporabrasivecleaningagents.
• Usethecleaningbrushtoremoveremaininghairafteruse.
• Removetheattachmentcomb.
Attach/Remove Clipper Head
The clipper head is locked to the casing.
1. Slidethebuttontowards“
”.
2. Push back the clipper head with both thumbs to open the catch.
3. Regularly apply 1 - 2 drops acid-free oil to the clipper head.
4. Replace the clipper head after cleaning first at the bottom and then at the cutting area.
5. Clean the casing with a slightly damp cloth, if necessary.
6. Replace the attachment comb.
Noise emission
Theworkplace-relatedemissionvalueislessthan70dB(A).