Power Supply User Manual

OBLIGATION TO PROVIDE INSTRUCTIONS

These operating instructions are designed to help you properly and safely install

and operate the following Uninterruptible Power Supply (UPS) systems: Protect

D. 6000 and Protect D. 10000, as well as the corresponding external battery units,

Protect D. 6000 BP and Protect D. 10000 BP, hereinafter collectively referred to as

Protect D. This operating instructions contain important information on avoiding

hazards.

PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE

FIRST USE!

These operating instructions are part of the Protect D.

The operator of this device is required to make these operating instructions

openly available to any person transporting, installing, servicing or performing

any other work on the Protect D.

VALIDITY

These operating instructions comply with the current technical speciﬁcations of

the Protect D. at the time of publication. The contents do not constitute a contract

and are for informational purposes only.

WARRANTY AND LIABILITY

We reserve the right to make any changes to the information in this operating

manual, with respect to the speciﬁcations and the operating instructions in

particular, at any time.

Complaints about delivered goods must be submitted within eight days of receipt,

along with the packing slip. Later claims will not be accepted.

Any damage incurred due to non-compliance with these instructions (including

damage to the warranty seal) will void the warranty. AEG accepts no liability

for consequential damages. AEG will rescind all obligations, such as warranty

agreements, service contacts, etc. without prior notice in the event that any spare

parts other than original AEG spare parts or those purchased by AEG are used for

maintenance and repair.

1. NOTES ON THESE OPERATING INSTRUCTIONS